Electric Air Balloon Pump

Product Description

How to Use the Pump?

Step 1: Take the cord out of the side storage compartment to connect to the power source.

Step 2:Turn the switch button to 【-】.

Step 3: Cover the nozzle with balloon.

Step 4: Inflate the balloon by 【Pushing】 nozzle Down.

Step 5: Release nozzle when the balloon size is suitable.

Step 6: Knot the air port of the balloon.

Attentions: ●Do not allow kids to use this pump alone.

Please keep it away from children. ● Do not use the pump continuously for more than 2 hours, otherwise the motor may overheat and cause internal damage.

After the pump has been working continuously for more than 2 hours, allow 30 minutes to fully cool down. ● Do not block the fill port and always provide ventilation. ● Do not store or use the pump in a humid environment. ● When the pump is working, please don't suck sand, small stones etc into the air inlet and air holes. ● Do not look inward or point the inflation port and blowing hole towards your eyes when the pump is working.

Pay attention!!! 1.

The sound of the balloon pump is loud when using.

Please keep away from children to avoid the noise scaring your kids. 2.

When you press the air connector, the balloon pump will release air.

This air has a great momentum, so do not let children get too close to avoid injury. 3.

The air pump performance is high.

With long-term use, the air pump will heat up, which is normal.

Just to let the balloon pump stand for a period of time, you can continue to use it after cooling. 4.

The pump needs to be plugged into a socket for use, not battery powered. 5.

Plan the room

Check backdrop width, hanging height, and the pieces included in a kit. Review whether mounting supplies are listed before planning setup.

Specifications

SKU B5-FESTOVIRA-B09Q5X7CMN